1. The hammer crusher has the advantages of large feeding particle size, large fine crushing ratio and high efficiency; 2. Simple structure, compact assembly and light weight; 3. The particle size of the product is uniform, and the excessive powder is less; 4. Easy maintenance and small wear and tear; 5. With the advantages of
Crusher is an indispensable equipment in the process of crushing ore, among which jaw crusher is particularly important. The crusher can crush more than 200 kinds of soft and hard stones below 1200mm, and is widely used in large-diameter stone processing and large-scale stone factories. 1. Working principle of jaw crusher The jaw crusher drives
The first is the performance of the crusher. A crusher equipment with outstanding quality and performance is very important to customers. It not only saves customers a lot of maintenance time, but also saves customers a lot of money for maintenance. Take a look at the advantages of the equipment produced by our factory, I
In the process of mine construction, the crusher is an indispensable equipment. It can increase the output of raw ore, reduce the loss of mechanical equipment, save the cost of the enterprise on the basis of ensuring the output, and improve the economic benefit. However, the wear of wear-resistant parts is a problem that many
In sand and gravel factories, impact crushers and hammer crushers are often seen, but it seems that more merchants choose impact crushers. What is the reason for this? There are certain differences between impact crushers and hammer crushers in terms of technical structure, working principle, material handling, and maintenance costs. The general mining machine editor
1. Failure phenomenon: fine-grained Reason: more hammers Solution: Lose a layer or two of hammerheads 2. Failure phenomenon: coarse granularity Reason: loose belt or low speed Solution: Tighten the belt and check if the voltage is 380V 3. Failure phenomenon: the broken body swings Reason: Unbalanced centrifugal force of rotor Solution: replace the hammer with
1. The equipment should be installed at the level of the concrete foundation and fixed with the anchor rod. 2. The installation should pay attention to the main body and vertical level. 3. Check whether some bolts are loose after installation and strengthen the host country’s warehouse door and require tightening. 4. Configure the power
1. Check whether the mechanism has a warehouse door before starting. It is forbidden to open the door during the operation of the machine to prevent danger. 2. The crusher must be empty to start and will be in normal operation before it is under the purpose of production. 3. According to the requirements of
(1) The structure is simple and reasonable, and the operating cost is low. Using the stone-on-stone principle, the wear and tear is small. (2), high crushing rate, energy saving. (3) It has the functions of fine crushing and coarse grinding. (4) It is less affected by the moisture content of the material, and the moisture
The lump ore falls into the upper crushing chamber from the feed hopper and onto the upper throwing disc. With the help of the centrifugal force of the throwing disc, the material is thrown to the inner wall of the cylinder, and violently collides with the counterattack plate installed on the inner wall. At the