For the machine-made sand production line, during the production and processing of various ore raw materials, the sand-making equipment also has certain wear and tear. The wear of the equipment will cause the failure of the sand-making machine during the production process, such as the sand-making machine working. When the sand making machine is swaying and vibrating, the phenomenon of swing and vibration may occur. Below, Wally will introduce the 4 reasons that cause the swing of the sand making machine.
1. The impeller is blocked
The impeller is one of the most important parts in the sand making machine. When there are obstructions in the impeller flow channel, it may cause uneven feeding, which may cause the body of the sand making machine to swing too much, and the phenomenon of swaying and vibration occurs. At this time , we need to remove the blockage on the impeller flow channel, and regularly check the impeller flow channel for blockage.
2. The wearing parts of the impeller are seriously worn
The sand making machine has been used for a long time, and the wear of internal parts is inevitable. If the wearing parts on the impeller are seriously worn, it may also cause the sand making machine to run unevenly, equipment swaying, and vibration. At this time, we need to Repair or replace worn wearing parts so that the operation of the equipment can reach a balanced state, and regularly check the wear degree of wearing parts.
3. The feeding material size is large and the sand making machine
In the process of sand making, if the feeding particle size of the material is too large and exceeds the particle size required by the equipment, the material will not be able to be uniformly crushed in the crushing chamber, causing the sand making machine to sway and vibrate. Pay attention to the feeding speed, and strictly control the particle size of the feeding material, which cannot exceed the size specifications required by the equipment.
4. Improper installation of sand making machine
When the sand making machine is installed, the foundation is not laid well or the installation foundation is not stable, which may also cause the sand making machine to sway and vibrate during the operation. Upper shock-absorbing material to reduce vibration during operation.
The article mainly introduces the 4 reasons that cause the sand making machine to swing and vibrate, and gives a detailed introduction and solutions to these reasons. The swing phenomenon of the sand making machine will affect the normal operation of the sand making production line and affect the sand making. progress, so be sure to pay attention during the production process.