Bearing is a relatively important part of the crusher. It is very important for the crusher. Long-term crushing processing will also cause the bearing wear problem of the crusher. Now let’s talk about the crusher shaft wear repair process.
Regarding the crusher shaft wear problem, the on-site situation of crusher shaft wear repair:
1. Observe the on-site equipment conditions and operating environment, clean up oil and impurities, and measure relevant data;
2. Carry out surface oil treatment on the worn parts, and then grind off the surface oxide layer and high points;
3. Clean the surface to be repaired with anhydrous ethanol, dry it for use;
4. Apply SD7000 release agent to the reference position on the shaft and the position to be protected;
5. Mix the Sore carbon nanopolymer material in proportion until it is uniform and has no color difference, and then apply the material to the surface to be repaired;
6. Use the reference scraping tool to scrape the material to size along the reference on the shaft and wait for the material to solidify;
7. After the material solidifies, grind to remove excess material and reinstall the parts to complete the repair.
