During the use of the crusher, it is common for the crusher to get stuck, which causes time and economic losses to customers. So how to effectively prevent the crusher from getting stuck?
1. The lubricating oil does not meet the standard. Too much, too little, dirty and deteriorated lubricating oil will affect the lubrication effect of the equipment, thereby reducing the speed of the equipment, causing the crushing effect of the equipment to decrease, and the material will accumulate in the crushing chamber and is not easy to discharge, so there is a blockage phenomenon.
2. The wear of the wearing parts causes the crushing particle size of the material to be too large. During the screening process, the material will not be discharged smoothly, which can easily cause the crusher to get blocked.
3. The feed speed is too fast and the crusher cannot break the crusher in time. If the feed is uneven and the speed is too fast during the crushing process, the material in the crushing chamber will not be discharged in time, which will cause serious blockage of the equipment.
4. The discharge port is not smooth. The crusher is generally installed at a high level, and there is a conveyor below. Some materials will fall under the conveyor. If there are more materials under the conveyor, it will seriously affect the normal discharge of the crusher.
5. The screen under the crusher is rusted, blocked, and other problems occur, resulting in slow discharge and blockage of the crusher.
6. The voltage is unstable. When the equipment is crushing, the voltage is unstable and the crusher cannot reach the normal speed, which can easily cause equipment blockage
7. The material is too large. The crushed material is too large, which causes serious wear and tear on various parts of the equipment. After a long time, blockage will occur. Once the crusher is blocked, it will affect future use and work efficiency. Therefore, when using it normally, you must pay attention to the method of use to ensure that the equipment can be used normally.
In summary, when the above situation occurs, stop feeding immediately, cut off the power supply, find out the cause of the blockage, and solve it.
